Author Archives: Harvey Specter
Author Archives: Harvey Specter
You want to know what does catfish like to eat? So, go on to find best bait to catch catfish in my post!
Hunting catfish is a long-time hobby of mine. My Dad started taking me to the coastal waters off the southern states of America when I was about ten years old. Back then, he only used one top of bait – shad.
Usually live, always a bit gross to me as a kid. But I got the hang of it, and over the years have begun trying out other types of baits with much success.
Here is a list of the top best catfish bait you need to know for success.
Another thing my Dad taught me was to be very specific about the types of dips I put on the rod.
I have a hard time trusting most of the store-bought kinds, except for a few that I’ve seen in stores down in Georgia that I can’t seem to find anywhere else.
The best dips are homemade by expert fisherman. These are one of the top best catfish bait you can find anywhere, because the person who blended the dip most likely did so for their regional fishing spots.
This dip will be effective in luring catfish in those spots because it will be made of local ingredients that the fish is already accustomed to.
In order to find a good local dip, I recommend doing one of three things:
The old stand-by is the night crawler. Worms are cheap, easy to transport, and easy to bait.
The biggest plus to worms is that they are relatively consistent across the board. Not the highest conversion rate, but you can take them to different streams and bodies of water and pretty much expect the same result each time.
You can stop into just about any outdoorsmen store and pick up some bait. Worms are best bait for catfish in rivers
My favorite thing to do when baiting with night crawlers is to stop in some little Podunk gas station or general store in a small town near where I’m heading out to fish, and buy some there.
I’ve heard some of the best stories about fishing and gotten some incredible tips in places like this. A few times I’ve gotten lucky and had a few beers thrown in with my order.
I know I talked about shad up above, and I really stand by shad as far as being a reliable bait. Here are a few other fish-based baits that are worth a try:
Here is video fishing with Shrimp
There are a number of random things that you probably have sitting around the house that will make perfect catfish bait. Be careful about polluting the water:
I always strongly advise against using WD-40, soap, or any other cleaning product because you’re basically just being an asshole and infecting the water.
It’s one of those situations where you might benefit in the short term, but you’re hurting everyone’s chances (as well as Mother Nature’s) down the line. Part of responsible fishing is conservation.
That said, here are some good household items to try:
· Some other ideas can be found here.
I’m always surprised that more people haven’t tried marshmallows as one of the best top catfish baits. They’re so sweet, that nearly any living creature is attracted to them.
Plus they’re really easy to get on the line and as long as you’re using the big kind, they should last a bit before being swept off the line. Hopefully, long enough to land you a catfish!
Catfish are one of the most desired fish in the sea. These top best catfish baits will give you plenty of things to try and see what works in the areas that you fish.
Do you have some suggestions of good bait that has worked well for you? Please leave a comment and let us know so that we can try them to.
If you enjoyed this article, blast it out on your social channels so that more people will try these things out and we can increase enjoyment in the great sport of fishing. And if you are looking a safe for your gun, check my recent post out!!!
You want to know which is better between .308 Winchester and 6.5 Creedmoor?
There has been much talk lately about the performance of the .308 Winchester versus the 6.5 Creedmoor. In my opinion, the 6.5 Creedmoor is a better cartridge overall. This is because of its ballistic capabilities and the fact that it is slightly smaller than the .308.
I happen to be fond of the little red tip as well, which is not present on the .308. In this article I’m going to show you why the 6.5 Creedmoor is the superior option, and why you should look for it to play an increasingly large role in the market, in everything from store shelf presence to gun fitting, going forward.
When shooting, both cartridges perform well and are effective for hunting and target shooting at the range. But for medium to long range shooting, the 6.5 Creedmoor is much better because it uses slightly skinnier bullets that make it down range at a faster rate of speed than the other, and I’ve seen multiple times this have a direct impact on accuracy.
The .308 just can’t quite keep up on shots over 700 yards is what I’ve noticed. The longer the shot, the bigger the difference there is between the two cartridges. The .308 Winchester is incredibly well-known in the shooting world. Pretty much everyone has experience with them.
If you’re going for something easy that is simple to get opinions on, fit to a gun, ammo for, or anything else, this is the winner here. But once we start to look a little deeper into the two cartridge types, some major points begin to rise. The 6.5 Creedmoor is a better cartridge, plain and simple. For long range shooting, for accuracy, for speed. Dare I say, even for consistency with loading and gun powder?
The shoulder is sharper on the 6.5 Creedmoor. This also factors into accuracy. If you spend a significant amount of time out in the field with both cartridges, you’ll notice that the brass lasts longer in the Creedmoor. The Creedmoor is based on a .30 TC Case, unlike the .308.
I do have to give the .308 credit for its consistency, however. Every time I’ve used it, or been hunting with someone who is, I feel like I know what to expect with each shot, from load to follow through. When I start getting carried away distance-wise with the 6.5 Creedmoor, I frequently notice some variabilities in the overall feel of the shot. This is particularly true when loading.
The case itself, on both options, is incredibly sturdy. They’ll be dependable whenever you need them and are worth the money. I don’t want to make it seem like I hate the .308 Winchester. I just think that it has had its time, and over the last ten years or more we’ve started to see the rise of a superior option. Particularly for distance accuracy, as I’ll note repeatedly.
I’ll give the .308 the edge for range shooting. It’s more consistent on shorter to mid-range shots and can be used in more guns. And because just about everyone has experience with them, these cartridges are easy to find bullets for and an expert to assist you with loading or anything else that you need help with.
The rising popularity of 6.5 mm cartridges is ensuring that shops will have more and more selections for the Creedmoor when it comes to bullets. Your choice of shot should be largely based on case outline. Again, the 6.5 Creedmoor is the winner here, particularly because as it grows in popularity, more options become available. Both cartridges will suffice just fine in the field. But if you’re hunting with someone using the other, you will notice differences over time.
The 170+ grain measure of the .308 struggles with magazine limitations. I also seem to have better luck with the Creedmoor when it comes to powder. It shoots at a higher speed: a 140-grain shot sees 2710 fps with a superior BC of .526-.535. You ain’t going to get that with the .308!
The 6.5 Creedmoor has less recoil because it fires lighter bullets, making the shots easier on you over time. The .308 is the winner on the lifespan of the barrel, due to the fact that that the .605 has a smaller bore and shoots at higher speeds. It does tend to wear the barrel out.
If you are finding the safe for you gun, don’t hesitate to read the best gun safe for the money to choose the good one
If you’re using a bolt action style rifle, .308 will be more apt to work with your gun. Obviously, this depends on what you’re using. But as the 6.5 Creedmoor becomes more popular, more rifle makers have started to make options that will accommodate. I’ve heard hunters say that .308 ammo is cheaper and more available (see video below), but this is going to be less and less of a problem as time moves along.
Since the 6.5 jumped into the spotlight, it has slowly gained momentum and traction. It’s versatility has increased in tune with that. Will it ever surpass the .308 Winchester in popularity? Probably not. Old hacks like me are stuck in our ways, in fact I’m one of the more progressive hunting types in my crew and the only one that currently prefers the 6.5 Creedmoor.
As I’m sure I’ve made very clear throughout this article, I prefer the 6.5 Creedmoor over the .308 Winchester. It’s a better cartridge because of improved accuracy and spotting, particularly in long range shooting. The .308 is the stuff of legend are lore these days, but sometimes its best that a legend passes the torch.
Down the line, the 6.5 Creedmoor will be increasingly fitted and common to more shooters’ tastes and hopefully we can wake up the rest to its superiority. And in my opinion, 6.5 Creedmoor is best ammo for an AR 10 rifle.
If you enjoyed this article, please share on social media so that we can get the good word out! Perthaps you’re an old .308 guru – throw a comment down below and let’s get a conversation going.
Many new shooters may not quite grasp the concept of length of pull. If you aren’t familiar with long guns, it’s probably not something you’ve spent time worrying about or measuring.
A long gun’s length of pull is the distance from the end of the gun up to the middle of the trigger.
When looking for the right gun, length of pull is one of the most critical measurements which will determine whether or not the gun will fit you.
Here, we’ll take a quick look at how to measure length of pull.
There are a number of factors to consider when measuring a gun’s length of pull. How long is your neck? Are you in shape or do you have fat poofy cheeks? And how big are you overall as a person?
Your personal dimensions must coincide well with those of the gun you hope to use. What is the long gun’s drop at heel and drop at comb? Trapshooters does a really great job in this article of breaking down length of pull measurements.
To optimize your shooting skills, having the correct length of pull is important because it allows for comfort and familiarity. Hunting is a sport of patience and repetition. Therefore, having a gun that is well suited to you along with the proper tools for the field will greatly increase your chances of success. Here is exactly why length of pull is important:
I always encourage young and new shooters to be professionally fitted to a gun for proper length of pull. That way, nothing is left to chance. They will likely run through several long guns until the perfect one that meets both your personal criteria (including budget) and the correct measurements is identified.
If you do choose to measure it yourself, remember to fit for comfort as much as you are fitting for measurements with a ruler or however you measure at home. It is critically important that the gun fits you – how much fun is doing an activity with improper equipment? Not very much!
It is possible to become comfortable with a gun’s length of pull even if it isn’t perfectly suited to you. This is much easier to do for experienced shooters and those that have spent their lives in the field trying out different long guns in different situations. Practice makes perfect, and experience makes comfort. That is my motto with shooting, and I encourage you to adapt that motto as well. For the newbies, get that gun measured from the middle of the trigger back to the buttstock and don’t settle for anything that doesn’t feel right!
As I’ve said many times before, shooting is all about comfort. Accuracy comes from comfort, and so does a budding passion for a life of hunting. Using a long gun with the correct length of pull measurements will put you on the right track for both of those. Double check the measurements, especially if buying a new gun.
If you are looking scope for you shotgun, i have write a post about 3 best shotgun scope for hunting in 2017, check it out.
If you’ve enjoyed this article, go ahead and share on your social media channels so that others can learn how to correctly measure length of pull and we can put those old rumors to bed for good. Leave any questions in the comments – we’ll get a discussion going.
An accurate shot begins with a proper mount and shoulder of the shotgun. As you progress as a hunter, from beginner to a more experienced shooter, certain patterns will begin to take form. One of the most important of these patterns is finding the best way to shoulder a shotgun.
Experienced shooters have their shouldering skills down to a science. It takes almost no effort to get the butt of the gun into the pocket and stance ready to go. I’ve been using the same shouldering stance since I started shooting, and I’m going to walk you through I there today. Let’s get started.
Just like in football, good footwork is incredibly important in shooting. The shoes that you wear should be well broken in field boots, or other active wear that are comfortable and flexible. Start by placing the feet about shoulder width apart. A little more than half of your body weight should be on the front foot, with knees bent and ready for action.
I usually draw a reference to bowling when describing the foot placement to people. I know this sounds weird, but hear me out – when bowling, it is important to position your body in a way that drives the ball toward to the pins you are aiming at. The same thing is true in shooting. Aim your back foot towards the target (as best you can).
In shooting, it is important to keep all body movement symmetrical to the gun and to the rest of the body. The gun hits the pocket at a 45-degree angle. Your eyes peer over the top of the shotgun at the same angle. The back of the head is perpendicular to the spine.
Once in position, all movement should come from the hips. Twisting and turning from there will allow you to keep the gun level and your aim on point. Be careful that you aren’t shifting your back around while in position. I always like to keep my knees bent slightly, for that extra bit of added pop. If I need to do any height adjustment, it comes from the knees. I never lift my toes or ankles up off the ground – it is important to keep the feet level, flat, and comfortable. Toes should be able to jiggle but the feet shouldn’t actually move.
Any shift required to hone in on a target should be initiated by a twist of the hips. I encourage you to do a bit of stretching before heading to the range or out in the field. This will ensure that you are loose and won’t pull any muscles should you need to move slightly to zero in on a target.
Let’s start here by lifting the right arm. If you aren’t already familiar with the pocket between your shoulder blade and neck, feel around until you find it. Before ever trying to fit your gun to the pocket, take a block of wood, a book, or some other firm object in your opposite hand and try to fit it into the pocket.
Once it’s in there, move around a bit. Find the positioning with the least pushback. Try to move your shoulder around in circles and ensure that the object doesn’t just slide right out or cause any discomfort.
When the gun is in there, it should have no problem staying there with the small bit of applied pressure from the other hand. The National Shooting Sports Foundation does a great job of showcasing fitting the gun to the shoulder, and realizing that you don’t have a gun fit problem, in the below video.
Face should connect with the same spot on the gun each time. You want your eye to be right over the center of the rib, providing a clean line of vision. This shouldn’t impact either the comfort level of the gun in the pocket or the accuracy of the shot. In order to have consistency, you’ve got to have comfort.
This is a repeating theme that you’ll find in each of the tips I’ve provided here. The best way to shoulder a shotgun is also the most comfortable way to shoulder a shotgun. There shouldn’t be much pressure on the shoulder before the shot. During the shooting process, the movement of the gun should trigger a similar reaction from the body. It should be a slithering snake-like process.
The gun fires, the body reacts and moves with the shot, and then the posture is reset post-shot.
After the shot, you shouldn’t have pain the shoulder, wrist, or elsewhere. It should be as though not much has happened – the main thing going through your body should be excitement at making a great shot from the pocket.
When asking yourself, ‘What is the best way to shoulder a shotgun,’ the correct answer is to find the pocket and then get yourself comfortable. These steps should help you to establish a solid, actionable stance that will increase both your accuracy and your comfort. Whether at the range or in the field, shouldering the shotgun correctly is as important as using the right ammo. Do some practice in your garage, and if necessary, have your gun personally fitted to you. Any gun shop can make this happen easily.
If you enjoyed this article, please share on your social channels. Education is key to top performance when shooting. Go ahead and post a picture of you in your shooting stance down below in the comments. I can’t wait to see what you’re shooting!
It’s that dreaded moment. The time when you have to move a gun safe from one place to another. Gun safes are notoriously heavy and difficult to move, much like that furniture you inherited from Grandma. Everything about the process basically sucks, but it is doable. Follow this simple series of steps on how to move a gun safe and you’ll have that thing in its new location in no time.
Get the safe as light as possible by removing anything that doesn’t need to be inside. Ammo, anything else that can be put in a separate box for now, should be taken out. If moving to a new house, park the moving truck with the rear facing either the sidewalk or driveway that you will be approaching from. Lower the ramp and be sure the path to get to the truck is made as easy as possible.
For larger safes, provide the team with worker gloves if they don’t already have some. I also find it helpful to provide pizza and beer to those that help me move – it seems to get everyone in a better mood and creates a team atmosphere. Here is a great video.
Gun safes are heavy in order to make them near impossible to steal should someone intrude into your home. Moving them about is intentionally a process. I moved my 800-pound gun safe from our old house in Naples, Florida to our new spot in Lyndon, Washington and learned the hard way that gun safes aren’t the most transportable of items. We spent an extra grand on gas on the drive because of the added weight. However, I picked up these tips:
Going around corners can be tough. The most important thing is to remain calm and proceed slowly. If you can, have a person position themselves on the far side of the safe (the side opposing the direction you are turning into) to provide added support from the back side. This person can forcefully push into the rear as the safe is moved around the corner. Go wide – by this I mean swing the dolly a bit further out than you initially think is necessary. That will allow the safe and dolly to be turned at an easier angle without striking the wall or toppling onto the person guarding the rear.
Ready to exert some strength? Good, because this is the time to show off how those gym sessions have sculpted your muscles.
With smaller ones, the process of how to move a gun safe is basically the same buy slightly less intense. Follow the above steps and make adjustments where necessary – you won’t need as many people or as much strength. If the safe can be carried, be sure to have at least two people for added support. Set the safe down gently and be mindful of doorways, walls, and protruding objects when passing through hallways. Do not set the safe on top of anything else – it’s weight may crush other objects.
Now you know how to move a gun safe. The process is tough but can be enjoyable with friends and a good attitude. One thing to keep in mind is that when moving the gun safe to a new house, identify in advance the best location for the safe. In the garage or a room where it will not need to be moved ever again. If you enjoyed this article, please share. Knowledge is power, just like teamwork! If you have any tips or anything, feel free to leave them in the comments and we’ll get a discussion going. Check out my recent post about best ar10 scope
Finding the right stance and getting comfortable with aiming is something that all new shooters have to go through. It’s a fun process – it allows for a bit of personalization and flare to come into the sport.
When I first started hunting with my dad and uncle and a kid, it took me several times of going to the range and trying out new positions. Once I became comfortable, I began honing my aim.
While much of it is about feeling, there are some general guidelines to follow. Here are some tips for how to aim a shotgun.
Spend any time hanging out at a gun range and you’ll likely see some interesting stances. Some stand straight and tall, others do weird things with their arms. My favorite is the old guy who stands with his feet super far apart – maybe he’s worried about knocking himself over when he takes a shot?
Here is where a shooter can put a bit of their personal vibe into their shooting stance and shotgun aim.
Now you’re in your stance and working on the rocking motion. If you haven’t already been doing so, hold the gun in a shooting position during the rocking process. Notice where you feel most comfortable during the rock.
Likely, it will be right about where 55-60% of the weight is on the front foot. Once you’ve identified this position, STOP!
That is your natural point of aim. The object with this term, as it relates to how to aim a shotgun, is that this is the angle where you’ll shoot the target. This is where the bullseye will be directly in front, or where the clay will be broken by your bullet.
It’s important to remember that you’re not shooting a rifle. Don’t stand fully sideways with the gun near the shoulder. I prefer to have the stance a bit more open here.
When aiming your shotgun, the goal is to be able to shoot in more than one direction without becoming uncomfortable or urged to reset yourself. Make sure you are able to comfortably position your head above the barrel and hone in on the line of site.
Aiming a shotgun is really about making the gun a part of your body. If it isn’t a natural stance, you’re never going to feel comfortable as a shooter. The right point of aim for you is the one that allows the most flexibility without compromising any sturdiness or power. Remember the rocking motion. I’ve been hunting for over fifty years now and still rock into my stance every single time.
Consider the best shotgun scope for your shotgun, it will help you have perfect shot!!!
If you’ve enjoyed this article, I urge you to share it on social media to help others get accustomed to finding the best possible stance and aiming their shotgun correctly. Feel free to leave any tips here in the comments, I’m always game for upping the ante a bit!
Do similar rounds produce similar results? Any experienced shooter will tell you that that is not always the case. For direct proof, look no further than the .260 Remington vs 6.5 Creedmoor. Both of these are a perfect match for the .308 Winchester rifle. In many cases, if you weren’t the one who loaded the rounds, you may not be able to even tell a difference.
My personal experience has led me to prefer the .260 Remington over the 6.5 Creedmoor. We’ll get into why in this article. I’m old school, is the main reason. This guy pretty much sums up my thoughts on the .260 Remington in this video:
.260 Remington is a classic among long-time riflemen, having been the backbone of what we’ve used for such a long time. The reason for this is that seasoned hunters have expertise in reloading. .260 Remington rounds necessitate this, while 6.5 Creedmoor rounds are better for those without that reloading expertise.
As many new hunters aren’t trained in the art of the reload, Creedmoor can significantly reduce the learning curve when looking to get out into the field. Additionally, the Creedmoor has a shoulder angle that is sharper than the Remington. This comes with less body taper
Additionally, less water is held by the Creedmoor. This won’t affect certain shooters, but it’s worth noting. It can fit a longer bullet because of this, but the general use of handheld cartridges has all but eliminated any benefit there. Here, a video description of the two takes place.
The brass on the .260 Remington is of a higher quality than the 6.5 Creedmoor. With the Creedmoor, you may find that the brass isn’t as long lasting. This affects hunters as they experience less overall durability and flow with their shooting than if they were to use the .260 Remington.
The Creedmoor’s case is a bit shorter than the .260 Remington’s. The Remington is undoubtedly faster as a result of the higher case capacity, necessitating less maintenance in the field. Remingtons are better for those looking to use a bolt gun, but for the semi-automatic inclined, the 6.5 Creedmoor is the better choice. I’m always using bolt, so the Remington works for me.
When it comes to distance shooting, the Remington will be solid up to at least 800-900 yards.
Beyond that, the accuracy can lose a bit of its dependability depending on skill and build. I’ve got mine accurate up to 1000, but I’ve been doing this for a long time. I will concede that the Creedmoor can perfectly nail a target from 1000 yards when built the right way and taken good care of. If everything is prepped correctly, that is the better option for really long distances.
I recommend keeping a chart of data from the rounds you fire with both. Test them out, and through your charts you can identify which one you are more accurate with, and which one makes the overall process easier for you. Keep track of powder, distance, velocity, and muzzle energy. I also encourage testing at different distances. Keep a record of 100 yard accuracy percentage compared with longer shots. Those who are new to long distance shooting should stick with the choice that they are the most comfortable with.
I also encourage shoots to watch some videos online of different practices with both options. Here are a couple great options:
At the end of the day, it really depends on personal preference. Take into consideration which bullets you plan to shoot, and whether or not you are willing to switch them to accommodate aesthetics or if you are hard lined on performance and personal comfort. I’ve grown so accustomed to the .260 Remington over the decades that I’m not going to be switching anything up at this point.
If you enjoyed this article, please share on social media – us gun freaks always love a good debate on equipment. Feel free to share your personal opinions in the comment section here, as I’m sure we’ve got a community of 6.5 Creedmoor users out there that have thoughts on the matter.
Perhaps the best part of using a rifle like the Ruger 10/22 is its sheer popularity among American shooters. The gun is very popular, and because of this, there are a variety of scopes and mod options that have become popular as well.
I’ve been using a Ruger since my Dad first took me out hunting as a kid, and have become very familiar with the different scope options available.
Today, we’ll take a look at three options that are the best scope for a Ruger 10/22 and why they stand apart from others.
Vortex Optics Crossfire II 6 - 18x44mm AO Riflescope, DEAD-HOLD BDC (Editor's Choice)
UTG 3-9X32 1" BugBuster Scope, AO, RGB Mil-dot, QD Rings (Good in price range)
This is my review about 6 scope for ruger 10/22 takedown on the market, it will help you find the best for hunting. Check out it:
If you’re looking for a best Ruger 10/22 scope that holds zero like an absolute rock, this is the one for you.
Many Ruger fanatics spend years looking for that extra bit of accuracy and momentum in the field, and Vortex Optics answered by taking a 12 and making it doable from further than a football field away.Up to 500 yards is no problem with strong accuracy. Any worries of missing turret clicks are eliminated by the recurring sound.
They are also protected under caps, allowing for longevity and durability that entry level scopes can’t offer.
Compared to other good scopes in its class, this one is the king. It easily stands its ground against top-notch offerings from elite manufacturers
This is what you’re getting with this product:
There has been much debate about what is the best scope for a Ruger 10/22. We’re here to put an end to this argument. Hands down, the best scope for a Ruger 10/22 is the UTG 3-9X32 1" BugBuster Scope, AO, RGB Mil-dot, QD Rings.
Let’s break it down for any unfamiliar with the product:
Among the scopes for a Ruger 10/22, this one stands apart for long-lasting, dependable performance.
Take it from a pro: there’s no sense wasting time and resources on flimsy pieces of crap. Go with the UTG BugBuster, hands down the best scope for a Ruger/1022
When looking to step up the scope game significantly, this best scope from Nikon for ruger 10/22 takedown is the perfect piece of equipment.
Open circle aiming points are very accurate from 50 to 150 yards (I’ve actually used it for shots that I estimated were up to 200, but not with the accuracy of under 150).
The crosshair is right in the line of vision and never blurry or faded, something that is frequently a problem with cheaper scopes.
The Nikon Eco-Glass lenses are arsenic-free. They also are incredibly vibrant when in front of the eye – I’ve never had any issues with reflection or fog
Nikon has perfectly engineered this scope for .22 ammunition, and there is no better weapon for .22 than the Ruger 10/22. It is the perfect combination.
Make sure your on-hand mounts are made for the Ruger 10/22 – special order them if not.
Mounting and zero issues may result from mounts that are not for this specific rifle. Other than that, this is a solid scope and worth the spend.
My friend has bought a few of them for different .22s and always have been satisfied. If you’re looking to impress with a great gift, this is the best option available.
This is a good scope for ruger 10/22
Leupold has the windage issue down with this ruger 10/22 scope.
In varied weather conditions, accuracy and ease of use remain largely unaltered.
Visibility is strong as well, although they reach the mid-level in this field at best.
This scope is ideal for rim fire and quick adjustments for moving targets, even in changing conditions.
No other brand beats them on that front.It’s funny, as it seems that scopes with the strongest visibility struggle with windage and vice versa.
If Leupold really wanted to conquer the market, they’d address this issue – but they’ve got their niche down and a following that stands by their products. In its class, this scope is a solid addition.
This is a good choice for your ruger 10/22 takedown
The TascoRimfire Series is top of the line, all the way. You won’t find a better scope for the Ruger 10/22 in its price range
The HD vision is superb. It really hones in on far-away targets and holds the view long enough to pull the trigger and get a good shot. I’m a fan because of these features:
The ruger 10/22 optics are fully coated. I’ve never had any sight problems with this scope, even after using it in multiple lighting scenarios and times of day.
The 50-yard parallax setting is standard and functional. Experienced shooters will find lines of sight to be as expected based on distance, terrain, and weather
One thing I always suggest with this scope is to purchase a separate weaver rail to go along with it. You can get one that is of much higher quality, and will last longer, than the one that Tasco makes. Also, buy additional scope rings if you don’t have any on hand. They will be necessary for proper and secure mounting.
Another hint is to make sure everything is properly mounted and fastened, so that the reticle doesn’t move.
If you’re using this scope regularly, check the security of the mounting each time you head out.Be sure to test it at both close up and further away shooting distances to get comfortable before forming your final opinion on the scope.
I found that it took a couple different scenarios before I fully grasped what it has to offer.
The Simmons Riflescope is built with optical glass lenses that, in my experience, are incredibly functional.
For an economical .22 scope such as this one, that feature really stands out.
Their HydroShield lens coating that they brag about is optimized as well. Two of the three scopes we’re talking about today are far from the high-end market, proving that best Ruger 10/22 scopes don’t have to break the bank.
The eyepiece is bright and vibrant, allowing for easy target sighting and zero fatigue when following a target or working to find the best shot location on the target. The clarity cannot be beat.
Here are the best features:
The mounting rings that come with the Simmons Riflescope are not well-suited to the Ruger 10/22. As typical, I suggest buying additional rings and weaver rail. It can be mounted.
The rubber surface is easy to adjust, even in rain, heat, or damp conditions. Once zeroed, the scope is as accurate as anything on the market.
Above all other scopes, this one gives the most bang for the buck. In the hunting world, that goes a long way because it allows more flexibility for other add-ons and modifications.
There are a variety of best scopes for a Ruger 10/22 on the market . These three are all well-suited for action, whether that be the range or out in the hunting field. The trendiness of rimfire shooting has led to the development of a lot of new scopes, but I always stand by the old classics. For mounting help, check out this great video.:
If you will reference this article in your upcoming scope purchase, we’d love it if you shared what you found helpful via social media. That way, others can learn more about the scopes as well.
I’d love to hear which one you ended up going with. Feel free to leave a comment here with thoughts and we’ll get a conversation going.
Binoculars are the perfect addition for just about any outdoor activity. Hunting, fishing, bird watching, you name it. Binoculars improve visibility and help the user specifically focus on their target. If taking a shot or observing an animal from afar, they improve accuracy over a long range. Here are the best practices for how to use binoculars.
Before zooming in, figure out exactly what it is that you’re going to look at. To get set, pick a solid object up against a solid color. A building, tree, or tall plant set against a cloudless sky is perfect.
After use, you’ll want to clean the binoculars for next time. This helps keep the set optimized for long term use. You’ll notice that dirty lenses make it incredibly hard to find the perfect zoom and focal points. This can lead to headaches and fatigue. When cleaning, be careful not to scratch the lenses!
In recent years, I’ve been using binoculars more and more to hone in my hunting and bird watching. A good pair really ups the visibility, and improves accuracy with long range shooting. Now that you’ve discovered the joy of using binoculars, please share this article on social media so that those closest to you can do the same! I love hearing about new tricks of the trade and activities, so feel free to comment as well.
The scopes on today’s rifles adjust to point-of-impact specifications.
A huge plus for hunters and shooters, accuracy in long distance shooting is greatly improved. The scope has knobs on the top and bottom, both of which have significant impact on the zeroing in your shot.
Old timers like me learned to adjust a scope back on Civil War-era weapons. Nowadays, it is much easier, but still takes practice and precision.
When learning how to adjust a scope, just follow these steps and mix in a bit of personal feeling based on your weapon.
Make sure you have the necessary tools to adjust your scope.
Ensure the scope is properly fixed to the barrel, and that you have a trusted rest in place.
Equally important is identifying the ammo you’ll use. The ammo that you adjust the scope with should be the SAME ammo you’re using in the field.
Here are the first steps:
Fire Some Test Shots
This is how you’ll test your bore sighting skills. How close was the shot? Don’t worry if it was not even close, especially if this is your first time adjusting the scope on this gun. Make small movements to the scope to get that zero dialed in. Remember that a zero at 25 yards typically goes high at 100 yards, so if 100 yards is the target distance, adjust the scope to be about one inch lower than the zero at 25 yards.
Use Modern Guns And Scopes
This sounds like a picky thing to say, but as I said above, I grew up adjusting really old scopes and rifles. Today’s technology is so much better than what I grew up on, there isn’t any reason to not use the latest stuff available. Unless, of course, you’re a historian or antique gun fanatic! The scopes on modern guns have two adjustable knobs that make the process both easy and fun.
Variable scopes allow for less adjustment than fixed-power scopes, as a result of an extra cam tube. Referring to the erector tube, don’t force down on the variable scope at all while adjusting for risk of restricting it’s functions. If you have an Ar10, so you can find the best scope for ar 10 to have the good shoot
From there, it’s all step and repeat. With each new scope, I recommend repeating this process to make sure that the scope is a) mounted correctly, and b) zeroed correctly.
Just like guns, scopes are all different. Gradually move your testing target further away as you get more comfortable with the scope.
Because this is so important, I ask that all readers who enjoyed this article take a moment to share it on social media or with family and friends that are avid shooters. Shooter should buy the best handgun safe for the money to keep family safe from your gun.
I’m all ears for tips that you’ve found for specific scopes, so feel free to leave a comment.