Maybe you’ve heard of AccuTrigger, maybe you haven’t. Sure, it sounds cool, but what does it actually mean? Is it just another name for any old trigger in a rifle?
In this article, we will talk about what AccuTrigger really is, and some advantages and disadvantages to using it.
Simply put, AccuTrigger is a two-stage adjustable trigger. More specifically, AccuTrigger is a specific trigger that the firearms manufacturer Savage Arms uses. If you’re hearing the term AccuTrigger, it refers to Savage Arms’ triggers, but it is also commonly used to describe other, similar triggers.
There were a few terms used there that maybe not everyone will be familiar with. First, let’s talk about what a two-stage trigger is.
Most triggers that you are probably familiar with are single-stage triggers. In this kind of trigger, there is only one motion that is made in the internals of the trigger mechanism. You pull the trigger back, and at some point, it fires. They are very simple.
In opposition to this, a two-stage trigger has more than one internal motion. The first stage of the trigger pull is pulling out the “slack” in the trigger. Once you’ve reached the end of the first stage, you hit a positive wall. Once you pull the trigger any further than this positive wall, you will reach the second stage of the trigger, which fires the weapon.
The next factor of the AccuTrigger is the fact that it is adjustable. While it may seem simple, al that this means is that you can adjust the weight of the trigger pull. You can make it either easier or harder to pull the trigger, which allows you to customize it to your needs.
Due to the fact that it is a two-stage, adjustable trigger, you will find that it is much easier to shoot.
Ever shot a weapon that you weren’t exactly sure when it was going to fire? When this happens, you subconsciously are anticipating the weapon firing, which can cause you to flinch, and shoot less accurately.
With an AccuTrigger, this is completely eliminated. You know exactly when the weapon will fire due to the positive wall in the two-stage functioning. This will prevent you from flinching, so you will be able to shoot more accurately.
Similarly, this is the same with the adjustable trigger pull. You will be able to fine tune the amount of pull it takes to fire the weapon, so that it meets your needs very precisely. These two things put together will allow you to be a noticeably more accurate shot.
However, this isn’t just with an AccuTrigger. This is applicable with any adjustable, two-stage trigger. While the AccuTrigger was one of the first, similar triggers are used in Ruger and Marlin weapons.
If you have never shot a two-stage, adjustable trigger, you should definitely give it a shot (no pun intended). We think that it will significantly increase your shooting abilities.
However, to say that this is absolutely necessary would be false.
If you are doing any type of precision shooting, a high quality trigger, such as AccuTrigger, is going to be extremely important to you.
But, if you are hunting, a high-quality trigger like this isn’t exactly necessary. It certainly won’t hurt, but you will be able to get by without it.
AccuTrigger, or any other adjustable, two-stage trigger is a great idea. However, if you aren’t a fan of Savage Arms (as many people aren’t), don’t feel that using an AccuTrigger is absolutely paramount. It will improve your shooting, but there are other choices. For those who don’t like Savage Arms, these other options would be worth looking into.
How Many Magazines Should I Have? This is a common question among new firearm owners.
It is a fairly simple question, but it doesn’t really have a simple answer. The primary reason for this is because it depends entirely on what you’re using your weapon for.
In this article, we will talk more about this, and make some basic recommendations for you.
Before being able to answer this question, you must first identify what type of shooting you’re going to be doing with your new weapon.
Are you planning on hunting? If so, what type of hunting? Different types of hunting warrant having different numbers of magazines.
If you are using your weapon for self defense, what is the magazine capacity of the weapon? Are you planning on carrying concealed or open?
In a home defense situation, the same question applies. What is the magazine capacity of the weapon?
This really depends on what type of hunting you are doing. If you are doing nothing but deer hunting out of a stand, you really can get by with only having one or two magazines. In a traditional deer rifle, your magazine capacity is pretty low, but you also aren’t having to take many shots per day.
On the contrary, if you are doing any varmint hunting, coyote hunting, or hog hunting, there’s a good change you’re using a semiautomatic weapon with a much larger magazine capacity. With this kind of hunting, there’s also a good chance that you will be taking follow up shots in quick succession. As such, it’s probably going to be better for you to own four or so magazines, to be able to have plenty of ammo for the hunt.
If you are carrying a single stack 9mm pistol concealed, there’s a good chance that your magazine capacity is going to be in the neighborhood of 7+1. In this kind of situation, having more ammo could be the difference between life and death. If you only have eight shots to engage the target… well, you better be a good shot. Having an extra two magazines certainly won’t hurt.
But, if you’re carrying a larger weapon with a larger magazine capacity, you probably can get away with only having one magazine and one spare.
This one is kind of broad, because so many different weapons are used for this. However, my opinion on this is that you are going to be using the weapon in a stationary area. It’s not like hunting or carrying a weapon, where you have to carry the magazines and extra ammo on you at all times.
In a home defense situation, I would keep as many magazines loaded as you feel comfortable with. For any type of weapon, there’s really no reason that you can’t have six magazines loaded and ready to go, just in case. And you should keep your magazines in the best handgun safe for the money in your home, it will keep safe for your family.
This one depends entirely on how often you want to reload magazines. You can get by with one magazine at the range and change after every shooting iteration, or you can bring six and change less frequently. The choice is yours.
Personally, I like to bring three magazines to the range. It’s less to keep track of, and I don’t have to spend time between every shot group to reload a magazine. It lets me develop a better shooting rhythm.
As you can see, this is a somewhat general question with a somewhat general answer. It really depends on what type of shooting you plan to be doing. Hopefully this article has pointed you in the right direction, or given you a general idea how many magazines you should really own.
The term “match grade barrel” is thrown around a lot in the firearms industry. If you are building or improving a firearm, I’m sure you’ve come across this. However, is this just a way for manufacturers and retailers to charge more for the same firearm, or is the barrel actually that much different?
In this article, we will talk about some of the features of a match grade barrel, and whether or not it is worth it for you.
At its core, a match grade barrel is supposed to be a barrel that allows for match grade accuracy. Essentially, this kind of barrel should allow you to be accurate enough to shoot in competitions with it.
What this means, is that the manufacturer should have tighter tolerances for the barrel. The barrel should fit extremely tightly against the chamber, to increase accuracy. These barrels are generally a little bit thicker and heavier, but are also sometimes made from different materials or treated differently.
However, there are some issues with match grade barrels.
For example, keep in mind that there is no set tolerance for a specific barrel for most weapons. What this means to you is that a match grade barrel made by one manufacturer may not be as good as other manufacturers.
Basically, one manufacturer’s match grade barrel may be worse quality than another company’s normal barrel, dependent on what their normal tolerances are.
Another thing to keep in mind is that firearms manufacturers tend to use the words “match grade” pretty loosely. If you are buying a weapon that is manufactured on a large scale, odds are that the internals are large scale manufactured as well. In this case, the match grade barrel from the factory may not actually be that high quality.
If you are going to buy a match grade barrel, make sure you do so from a well known manufacturer that custom makes each barrel.
Honestly, if you aren’t exactly sure what a match grade barrel is, odds are you probably don’t need one.
A true match grade barrel is very important for competitive shooting, but that is about it. There’s nothing stopping you from getting one for other uses, but you are probably spending a lot more money than you need to on a barrel.
A true match grade barrel from a reputable manufacturer can greatly increase your weapon’s accuracy. However, make sure you actually need to spend this extra money before buying one.
If you are just doing some casual shooting or hunting, you are going to be fine with any barrel. However, if you are doing competitive shooting or extremely long range hunting, a high quality barrel is going to vastly improve your abilities.
If you are upgrading or building an AR-platform weapon, I’m sure you’ve run into the term free float handguard. However, if you are relatively new to firearms, it may be a little difficult to decipher what that actually means.
So, what is a free float handguard? What is a drop-in handguard? Which one should you use? In this article, we will go over some of the basics about handguards, and make some general recommendations about when each type is better.
The handguard of an AR-platform weapon is the part that surrounds the barrel. It is what you hold onto if you’re shooting correctly.
Related: you are using Ar-15? Let's find the best scope for ar15, it will help you have better result in shooting.
Having a handguard at all is necessary because the barrel heats up significantly, but choosing between a free float and a drop in can be a little difficult.
We will start with the easier one. A drop-in handguard is essentially just a two piece guard that is held in place by what is called the delta ring of the weapon. The delta ring is spring-loaded, so it will hold the handguard in place. To change it, all you have to do is take the tension off the delta ring, and remove the old handguard.
Drop-in handguards are extremely easy to install. They are also relatively inexpensive, because it is a very simple system. These are often polymer, but there are also plenty of drop-in handguards that have a rail system to them.
A free float handguard is mounted directly to the upper receiver of the rifle. It doesn’t even touch the barrel at all, and there is no delta ring on the weapon. The term “free float” comes from the fact that the handguard doesn’t touch the barrel.
Free float handguards offer much more in the way of customization. You can get multiple different rail systems, such as KeyMod or M-Lok, and you can get a handguard that is the full length of the barrel. However, most of these options come at a much greater cost. They are also more difficult to install.
If you are looking for an extremely sleek, tactical-style weapon, you are probably envisioning a free-floating handguard. Due to the wide variety of options available, you are able to customize the weapon to meet your exact look.
If you are doing any type of shooting that requires extreme accuracy, a free-floating handguard will be better for you.
When you use a drop-in handguard, it has a little wiggle to it, since it is only held in place by the delta ring. A free-floating handguard won’t move when you are shooting. The fact that it doesn’t touch the barrel also improves the accuracy.
If you’re looking to attach a bunch of accessories, the free-floating handguard can offer more real estate for you. However, you can get drop-in handguards that have four-sided rail systems, and will work just fine for attaching accessories.
If you are just a casual shooter, a drop-in handguard will work just fine. They are easy to install and use, so there is nothing to worry about.
If you are just looking for a simple home defense or survival rifle, a drop-in will also be fine for you.
As you can see, there are actually a few significant differences between the two types of handguards. While both will work great for you, there are certain circumstances that warrant the use of one type over the other.
So, you’re working on building or upgrading your AR-15. Everything is going great, until you are faced with one issue. Which coating is best for your bolt carrier group?
There are actually quite a few more options than most people realize. However, it can be pretty confusing trying to pick one of them. In this article, we will talk about some of the available coatings and the differences between them.
We will also make recommendations about when to use which coating.
Let’s take a look!
We will start with the most common coating. Phosphate coating, also known as manganese phosphate coating, phosphating, and Parkerizing, is a pretty simple process. The bolt carrier group is placed in phosphoric acid and heated up to around 200 degrees Fahrenheit.
This coating is extremely common because it is inexpensive and durable. It is used in military rifles, which increases its popularity, but also guarantees its durability. Phosphate coated bolt carrier groups will be very resistant to heat, wear, and corrosion. They will usually be black in color.
However, it does have a few shortfalls. Phosphate coated bolt carrier groups have more friction, so they will require more lube to work well. They are also more difficult to clean.
The next coating we will talk about is the various nickel coatings. These have a variety of names, some of which are nickel boron, nickel boron nitride, and NP3.
This process is slightly more difficult. It is accomplished through electroless nickel plating. Basically, there’s a chemical technique that deposits a layer of a nickel material on the metal of the bolt carrier group.
The result of this process is a bolt carrier group that has almost no friction. As a result, it doesn’t require much lube and is very easy to clean. They are also very sleek looking, as they are usually a shiny silver. However, the nickel coatings are not nearly as durable, and are more expensive than the phosphate coated ones.
Nitride coatings, such as black nitride and Melonite, are very tough bolt carrier groups. This finish is accomplished through a process called ferritic nitrocarburizing. This process requires a pretty high level of chemical knowledge, but we will attempt to give you the down and dirty.
Basically, nitrogen and carbon are diffused into ferrous materials at an extremely high temperature. It requires a salt bath, but the metals undergo a reaction that creates multiple layers on the surface.
What you need to know is that nitride coated bolt carrier groups are extremely hard and durable. They are similar to phosphate coatings in terms of durability, but are slightly easier to clean.
I know what you’re thinking. Isn’t titanium nitride a nitride coating? The answer is no. Just to make all of this even more confusing, titanium nitride is completely different than the other nitride coatings.
Titanium nitride coatings are created through a process called vapor deposition. Once again, this requires some chemical knowledge.
Titanium is changed from a solid to a gas and reacted with nitrogen in a vacuum, which creates very thin film.
A bolt carrier group that is coated with titanium nitride is gold in color, which is awesome.
However, they are also very resistant to corrosion, and are extremely smooth.
Similar to nickel coatings, titanium nitride is very easy to clean, and doesn’t require much lube.
Also similar to nickel coatings, titanium nitride bolt carrier groups are pretty expensive.
Titanium nitride is a better choice than nickel boron though, because it is much more durable.
For most applications, phosphate coated bolt carrier groups are a good choice. They are durable and dependable.
If you are looking for the best overall bolt carrier group, look for a titanium nitride one. However, if you ever might have to be concealed, such as in a tactical or home defense situation, you definitely want to look elsewhere, as the titanium nitride coated bolt carrier groups are a very shiny gold.
If you are building a show weapon, you probably want something that is nicer looking. In those circumstances, a titanium nitride or nickel coating is going to be your best bet.
Similarly, if you are looking for a coating that will not require much lube, titanium nitride and nickel coatings will be your best bet. Nickel will be less expensive, but less durable.
If you just want something tough and durable, check out the nitride coatings. They are very similar to phosphate coatings, but are easier to clean.
No matter which direction you choose, make sure you stick to quality brands. There may be cheaper options out there, but keep in mind that you usually get what you pay for.
If you have looked up information about guns and their durability, then you might have heard of a product called cerakote.
It is a coating that goes on the gun to help protect the metal and moving parts. On top of this it also comes in a variety of colors, so you can have a more custom feel for your firearm that gives it a look that is personal to you. Read on to learn more in-depth information on what Cerakote is and its benefits.
For many years their was only a few ways to protect your gun from the elements. Guns have always been made of metal and some times the steel was blued. This was a heating process to help protect it from pitting and corrosion. Since guns are used outside a lot, they are easily exposed to the weather. Things such as water could easily cause the metal to rust which could lead to the gun not functioning correctly.
On older guns parts of them, such as the handle or butt, were also made of wood. Wood also would break down over time and wear. As time when on people started using pearl grips and things to help protect the parts of the gun that were exposed to wear and the weather more often. Today there is a new product that can protect your gun.
This new product to help your gun last as long as possible is Cerakote. It is a ceramic type material with a polymer mixed into it to help it attach to all kinds of material. Now that guns have a lot more moving parts, it is even more important to keep your gun protected from the elements.
Cerakote is applied in a very skilled way because a small amount of thickness change in a gun can cause it to not function right. The first thing is the gun is completely disassembled, not just field-stripped. It is then degreased and blasted with garnet sand to remove any oils. After the coating is put on in a smooth and even way using an HVLP spray gun. Lastly the metal parts are cured at 250 degrees and the plastic and polymer parts are cured at 150-180 degrees.
So now that you know what Cerakote is and how it is applied, what are the benefits to it? Well like has been mentioned guns have a lot of moving parts now a days, and any wear on these parts can cause the gun to stop functioning correctly. A lot of things can cause wear to a gun from normal use to mishandling.
Normal wear occurs because you have oils on your hands that can eat into the metal parts over time. Also, the slide part of the gun is moving back and forth which causes friction. If your gun does not have a slide but is instead a hammer, the hammer hitting still causes wear. The bullet also coming out of the chamber causes wear over time to the inside of the barrel. Also, the small explosion on the inside each time to propel the bullet out causes wear.
Some of these wear causing things can be slowed down with proper care. If you clean your gun and oil it regularly, then it reduces the effects of the friction. Also, some of the smaller parts can be replaced easily and this will help your gun last longer, but some mishandling things or accidents can't be prevented or protected against in other ways.
Carrying the gun can lead to it getting scratches and things just from it bumping into things. These cosmetic issues don't really affect the function, but if you are spending a lot on a gun you probably want it to stay looking good for as long as possible as well. Also, a drop could cause cosmetic damage and functioning damage, but if you have a coating on the gun these damages can be reduced.
Cerakote puts a layer on the outside of the gun that is hard and protective. The ceramic in the Cerakote keeps the gun from getting scratched if it bumps into different things or gets dropped. The thin layer also protects the moving parts from wear. This keeps the gun in the proper specifications for longer so you don't have to replace parts and it keeps functioning correctly. Lastly it protects the gun from the elements, such as water, so the metal does not rust or pit.
The other benefits are that Cerakota comes in over a hundred colors. This means you can get your gun to look however you want. You can even have different parts of the gun be different colors, so the possibilities are endless. Some might think that customizing the color is just for aesthetics, but doesn't add any real benefits. While this is mostly true, it isn't completely true. If you are wanting to hide your gun, then you can get it in a color that is more easily concealed. That is one reason why getting a custom color can add more benefits than just making you happy.
So you still may be wondering should you do it to your firearm.
My answer would be yes.
It is an added cost, but it will keep your gun functioning correctly for a lot longer. The added protection for your gun and then the fact you can make your gun your own, out weights any cost. The technique used now makes it so getting Cerakote on your gun will not do any harm to it.
You should have the best handgun safe to protect your Cerakote pistol.
Cerakote adds a lot of benefits to your gun at no risk besides the cost of having it down. While there are a few other options on the market, Cerakote is the tested method that a lot of people love. If you are looking for a way to protect your firearm, or to make the gun your own, then Cerakote is a great option for you.
If you are building an AR-15 or changing out some parts on one you already have, I’m sure you’ve run into this dilemma before. Is a carbine or mid length gas system better for my AR?
In this article, we will go over some of the key facts of the gas system, and make some very simple recommendations about which gas system is better for you.
The gas system of an AR-15 is what allows the weapon to cycle. Once you fire the weapon, gas is generated by the chemical reactions of the propellant of the cartridge. This gas pushes the projectile forward, but also work to cycle the bolt.
Related: If you are using ar15, i highly recommend the best ar 15 scope for the money, it is useful.
It is actually pretty simple how this is accomplished. The gas system has a small hole to vent gasses that is near the front sight post of the weapon. The vent hole is connected to a gas tube, that goes back into the receiver.
Once the bullet passes the vent hole, the gas will enter this hole and flow through the gas tube until the bullet exits the barrel. Once the gas moves back into the receiver, it provides the power for the bolt carrier group to chamber the next round.
However, after the bullet exits the barrel, the gas won’t all vent through the small vent hole anymore. Most of it will vent through the end of the barrel.
As you can imagine, this all happens pretty fast.
Carbine length gas systems are shorter than mid length gas systems. What this means is that the vent hole is closer to the receiver on a carbine length gas system. In turn, that means that the vent hole is further from the end of the barrel.
The length of the gas system affects the cycling of the weapon. If the bullet is past the vent hole but in the barrel for a longer amount of time, more gas will enter the vent hole. So, if the vent hole is closer to the barrel, less gas will enter the gas tube.
In a carbine length gas system, there is a greater distance between the end of the barrel and the vent hole. This means that more gas will enter the gas tube when compared to a mid length gas system.
On a standard 16 inch or an 18 inch barrel, we recommend a mid length gas system.
The reason for this is that a carbine length gas system will allow more gas to enter the tube, which will increase recoil, and will cause additional wear on the internals of your weapon.
On a 14.5 inch or shorter barrel, we recommend a carbine length gas system. With this shorter barrel, there is less space between the vent hole and the end of the barrel, so the correct amount of gas will enter the gas tube.
If you are using a 20 inch barrel, a rifle length gas system should be used.
When you are building an AR-15, one of the most important aspects of the build is the barrel.
Trying to decide which one is right for you? Look no further. In this article, we will go over our top five choices for AR-15 barrels. We will also talk about the different types of barrels, and what each should be used for.
Obviously, the most feature of any barrel is the accuracy.
If your rifle doesn’t shoot accurately, what point does it serve?
High quality barrels can go a long way in increasing the accuracy of the rifle.
Other features to keep in mind are the durability and the size. Certain metals will be more durable than others due to their chemical composition. A more durable barrel will last longer on your AR-15 build.
Specifically, the material the barrel is made out of can greatly increase the weapon’s accuracy.
If you don't have time, you can quickly check here:
There are two main barrel compositions:
Chromoly steel is an alloy. Barrels made from this material are the most inexpensive and are fairly accurate, but will not last as long.
Stainless steel barrels are more accurate by a comfortable margin. They will also last a little longer, because they are more resistant to corrosion. However, they are slightly more expensive and are heavier.
From there, some barrels are given either a chrome lining or nitride treatment.
Chrome lined barrels will last longer, but will decrease the accuracy.
The chrome lining will preserve the barrel and prevent corrosion even further. However, as the lining wears off, the accuracy of the barrel will be negatively affected. Nitride treated barrels will also last for a long time, but without the decrease in accuracy.
As far as the size is concerned, keep in mind the barrel length requirements in the United States (assuming that is where you are purchasing from).
If your barrel is shorter than 16 inches, your rifle will be considered a short barreled rifle, commonly referred to as an SBR. These weapons are covered under the National Firearms Act, and will require a tax stamp from the ATF. However, for our list, we will focus on 16 inch barrels.
If you are looking to do competitive shooting that requires extreme accuracy, stainless steel will be the best barrel for you.
The increased accuracy will be the most important for this type of shooting. Avoid chrome lining for competitive shooting, as the accuracy will degrade over time.
For hunting, accuracy is less important.
Especially if you will be hunting in a humid area or in the rain, resistance to corrosion is going to be crucial for this type of shooting.
The most important aspect of the barrel for this type shooting will be to ensure that the barrel is treated somehow, either with a chrome lining or a nitride treatment.
Both chromoly steel and stainless steel are resistant to the elements, so the treatment becomes the most important part for a hunting rifle. A hunter should have best ar15 bipod to hold your ar.
If you are just a casual shooter, it is dependent on how much you shoot.
If you shoot thousands of rounds per year, you probably are going to want a chrome lined barrel. It will last longer for you.
If you don’t shoot that much and clean your rifle adequately, any barrel choice will work for you. In this situation, we would recommend a stainless steel barrel due to the increased accuracy.
First on our list of best AR-15 barrels is this 16 inch cold hammer forged barrel that is made of chrome moly vanadium.
The fact that the barrel is cold hammer forged creates an excellent barrel. It has a 1:7 twist rate, weighs 1.75 pounds, and has a chrome liner on the inside of the barrel.
The pros of this barrel are the durability and reliability. These features come mostly from the chrome lining and the phosphate exterior finish. Despite the fact that this is a chromoly barrel, the chrome lining will increase the durability. The reliability is backed by Daniel Defense’s warranty to protect against any material defects.
The cons of this barrel are the price and accuracy. This is the most expensive barrel on the list. While this is the most accurate chromoly barrel, stainless steel barrels will still be more accurate.
Next up is this lightweight stainless steel barrel from Modern Armory. This barrel has a 1:7 twist rate and weighs 1.25 pounds. Since it is stainless steel, this is the best AR-15 barrel for accuracy shooting.
The pros of this barrel are the light weight, accuracy, feed ramps, and the lifetime guarantee. The fact that this barrel is so lightweight gives you the pros of a stainless steel barrel without the primary con. The accuracy of this barrel is unquestioned; Modern Armory guarantees 1 MOA accuracy at 100 yards when it is used properly. Another great feature is the feed ramp, which will help to ensure a round is smoothly chambered each time. The barrel is also available at an excellent price.
As far as cons, the gas block and gas tube aren’t included in the base price, but are still relatively inexpensive.
Next up is another 16 inch chromoly steel barrel. The barrel has a nitride finish for increased strength and durability. This barrel weighs 2 pounds and has a 1:8 twist rate.
The pros of this barrel are the durability, feed ramp, and price. Due to the nitride finish, this is an extremely durable barrel, and the accuracy will not be as negatively affected. Bear Creek Arsenal expects sub 1 MOA accuracy from this barrel. It is also available at an excellent price.
The cons of this barrel are the weight. As you can see, this is a heavier barrel, so that is something to keep in mind. Another potential con of this barrel is the overall quality. The previous chromoly barrel was cold hammer forged, which increases the quality. However, Bear Creek Arsenal barrels are individually inspected to guarantee their quality.
This 16 inch chromoly steel barrel weighs 1.5 pounds and has a 1:8 twist rate. The barrel has a parkerized finish, similar to what the military M4 barrels have. It is the most affordable on our list, and is the best AR-15 barrel for the basic build.
The pros of this barrel are the price and weight. Don’t let the price fool you, Anderson Manufacturing is well known for their quality, and this barrel is no different. However, this price is available at an extremely affordable price. The weight of this barrel is one of the lowest as well, so it would work well for a lightweight build.
The cons of this barrel are the durability. Due to the fact that there is no chrome lining or nitride treatment, this barrel will not be as durable as some of the others.
This barrel from Rock River Arms is a chromoly steel barrel with a chrome lining. The twist rate is 1:9, and the weight is over 2 pounds, although that weight does include a bayonet lug, barrel nut, handguard cap, and the front sight post. Without those parts, this barrel would be close in weight to most of the others on the list.
The pros of this weapon are the durability. Due to the fact that the bore and chamber are chrome lined, this rifle will last thousands and thousands of rounds of ammunition.
The cons of this barrel are the price and accuracy. This is among the most expensive barrels on our list. As previously talked about, accuracy is negatively affected when a barrel is chrome lined.
As you can see, there are plenty of different features and factors to consider when looking into buying a barrel for an AR-15 build.
When looking to purchase, keep in mind the accuracy you require, how much you plan to shoot, and how much you would like to spend.
Also keep in mind any local laws about minimum barrel lengths.
While it is by no means an all-encompassing list, we hope that our list of best AR-15 barrels has at least pointed you in the right direction.
Most modern firearms are treated with some type of exterior coating above the metal to reduce the chance of the metal underneath rusting.
However, this is not to say that it is impossible for a modern firearm to rust. Rusting is most common in older firearms. Looking to fix up one of grandpa’s old guns? Wondering how to get the rust off?
Look no further. We will go over the best way to take rust off a firearm, and some things to avoid doing.
It is worth noting that this will only help in removing surface rust off a firearm. If your gun has fully rusted through, it is going to take significantly more work than what we are recommending here.
Rust forms when iron reacts with oxygen.
This process is referred to as oxidization. The process is generally really slow, but can be significantly sped up when the metal is introduced to salt or water.
This is the reason that one day in the rain can cause surface rust to form on a firearm.
Removing rust is not a hard process.
You will have to essentially scrape it off, using a metal that isn’t as hard as the metal of the firearm.
You can use a harder metal, but it will ruin the finish of the firearm.
For this reason, your best bet to remove the rust off the firearm is going to be copper products. To successfully remove the surface rust, you’re going to want:
Removing the rust is pretty easy. You just need to scratch it off using the copper products already mentioned.
It really is that simple. There is not an easier way to do it safely. It’s just going to take some elbow grease to get the rust off.
There are quite a few rust removal products available on the market.
While these may work for other metals, I would strongly recommend against using these chemicals on a firearm.
Since you don’t know what the surface of the firearm was treated with and what else might have been added to the metal, you have no idea how the chemicals will react with the metal of the firearm.
The result could inadvertently ruin your weapon. I have heard of some people using Evapo-Rust as a worst-case scenario rust remover, but would still recommend against that, if at all avoidable.
You should store gun with best gun safe and dehumidifier, it will help your gun cleaner.
That’s it. It really is that simple to remove the rust off of a firearm.
Unless it is completely rusted through, using some copper wool, a copper brush, and some good old-fashioned elbow grease will take care of the surface rust on a firearm.
There are some commercially available rust removal chemicals, but I would strongly recommend against using these.
Despite the fact that a striker and a hammer serve the same purpose, they are actually a little bit different.
Ever wondered when a striker fired weapon may be better than a hammer fired weapon?
In this article, we will go over the differences between the two and a comparison about when each firing mechanism is better to have.
For starters, striker fired and hammer fired refer to how the firearm actually fires a bullet.
A hammer fired weapon, as the name may imply, has a hammer.
A perfect example is a revolver and any 1911 semiautomatic pistol.
When you rack the slide of a hammer fired weapon, it cocks the hammer back.
When you pull the trigger, the hammer will fall, which strikes the firing pin. The firing pin then springs forward and punches the primer of the cartridge, which then initiates the propellant that sends the bullet down range.
However, one thing to keep in mind is that not all hammer fired weapons have external hammers. There are some weapons that have internal hammers that you will not be able to see.
Striker fired weapons are fired by an internal striker.
Think about any Glock firearm. These all work with an internal striker.
When you rack the slide of a striker fired weapon, the internal striker is cocked. When you pull the trigger, that internal striker is what rides forward to punch the primer. Most striker fired weapons can only be decocked by pulling the trigger.
One common thing that you hear is that hammer fired weapons are safer.
People say that because of the fact that you are able to decock the hammer, you are unlikely to accidentally discharge the weapon. Once you rack the slide and a round is chambered, you are able to decock the hammer, if you are not ready to shoot yet.
In a striker fired weapon or a weapon with an internal hammer, you are NOT able to decock the hammer or striker.
Usually, the only way to decock the hammer is to fire the weapon, although you can obviously pull the slide back and take the round of the chamber.
My opinion is that both firearms are definitely safe in the right hands, but the external hammer does add an additional degree of safety.
Another reason that I think hammer fired weapons with an external hammer are slightly safer, is that you can actually see the position of the hammer, so you will know exactly what position the firearm is in.
In my opinion, hammer fired weapons with an external hammer are excellent for new shooters.
Being able to physically see the position of the hammer, and what pulling the trigger does to the hammer is a tremendous advantage to someone new to firearms. However, this is just my personal opinion. Safe handling of any firearm will make it easy for a new shooter to learn and shoot.
Striker fired weapons are more commonly used as concealed carry weapons.
The reason for this is that the striker fired weapons don’t have a hammer that can catch on the user’s holster or pocket. Since everything is internal, it makes for a sleeker weapon with no snags or catches.
For home defense purposes, I also prefer striker fired weapons. The reason for this is that I like the point and shoot use. In a high stress situation, there is nothing to worry about other than aiming and pulling the trigger.
For hunting and general shooting purposes, either type of weapon will work, and I don’t really have a preference. The important thing is to ensure that you are using the weapon safely, and are familiar with how it functions.
Related: Best shooting sticks for hunting is good accessories for hunter. You should have one.
Overall, both striker fired and hammer fired weapons systems are excellent options.
The primary difference is how the firearms is actually fired. In a striker fired weapon, an internal striker is cocked back and fired when you pull the trigger. In a hammer fired weapon, there is a physical hammer that does the same.
While both weapons have their pros and cons, they are both excellent choices.
Striker fired weapons generally are better in defense situations, but hammer fired weapons will also perform admirably.
New shooters may learn better from hammer fired weapons, and some old school shooters will prefer hammer fired weapons.
It comes down to personal preference, and whatever you can comfortably and safely use.